Telephone operation
49
Transfer a call
While on an outside call, you can transfer the call from one
system device to another. This feature is only applicable to
models with more than one handset.
During a call, press OPTION.
Press q or p to scroll to Transfer, then press SELECT.
If your system has two handsets, the outside call is put
on hold and your handset shows Transferring call to
HANDSET X. The destination handset rings and displays
Transfer from other handset.
If your system has more than two handsets, the handset
displays TRANSFER TO: and a list of registered handsets.
Press q or p to scroll to the destination handset and
then press SELECT.
-OR-
Use the dialing keys to enter the destination device
number (1 to 9 for HANDSET 1 to HANDSET 9,
and 0 for HANDSET 10, or and for
All handsets)..
Your handset displays Transferring call to HANDSET X,
or Transferring call to all... if you choose All handsets.
The destination device rings and shows Transfer from
HANDSET X. To answer the call, press, press , or any dialing key
(0-9, or ) on the destination handset. Your handset
displays Call transferred when the other handset picks up
the call.
If the destination handset is out of range, your handset shows
Unable to call. Try again. and then automatically returns to
the external call.
If the destination device does not answer the transferring call
within 30 seconds, the call will be reverted to the originating
handset. The originating handset displays Ringing back. No
response to transfer. If you do not press , or any dialing
key (0-9, or ) on the handset to reconnect the
outside call within 30 seconds, the call ends automatically.
1.
2.
•
•
◊
◊
3.
•
•
Directory
Caller ID log
Intercom
BACK SELECT
Transfer
TRANSFER TO:
HANDSET 1
HANDSET 2
All handsets
BACK SELECT
HANDSET 1
Call
transferred
Transferring
call to
HANDSET 1
1:35am 8/20
Transfer from
HANDSET 3
SILENCE
To Next Page
Loading...
Need help?
General
