Note: If a memory card is being used, data stored in the internal memory
cannot be seen in the camera unless the memory card is removed.
When the internal memory of the Kidizoom
®
Touch is getting full, or
when the le indexes are used up, you should back up all the les from
the camera’s internal memory to your computer. Then delete the les in
the camera’s internal memory to free up space.
D. Camera Options
Photo Resolution - For the best picture quality, please select 2.0
megapixel, otherwise choose the lower quality at 0.3 megapixel if you
want to save more pictures.
Indoor Light Frequency - The default frequency is set according to
the A.C. frequency of your region, please leave your camera set to the
default value unless you are travelling.
E. Date & Time
This menu shows the current date and time. If you want to change the
date or time, touch Set. After entering the Set Date & Time menu, touch an
item to select and use the
icons to change the value in the selected
item. If all the items are nished, touch the icon to exit this menu.
F. Touch Screen Calibration
If you nd the touch screen response is not good, maybe you need to
do a touch screen calibration. Touch the
icon to start and follow the
on-screen instructions to complete.
19. Download Manager
In the Download Manager, you can view the memory size of each download,
or you can delete any unwanted downloads to free up memory.
To delete the downloads, touch the
icon next to the download item
and select
to conrm the delete command.
Note: Once the downloads are deleted, you may connect to the VTech
Learning Lodge to download the application to the camera again.
20. How To Download
Please follow these steps to download the VTech Learning Lodge software:
1. Connect Kidizoom
®
Touch to a computer using the USB cable.
2. Click the Download Website link in the Kidizoom drive that appears on
your computer, or visit this link directly:
www.vtechuk.com/download
Activities
145003 manual_Running change .indd 21 08/09/2013 16:09:07