VTech LS6185A User Manual

18
4.8.4 Delete the Entire Redial List
Follow Steps 1 and 2 in the section of Redial a Number from the Redial List.
Press and then to select DELETE ALL.
Press to conrm
Press to conrm again.
4.9 Find the Handset (PAGING)
Paging is a useful way for nding lost handset(s).
Press on the base station. All the registered and available handsets will
produce the paging tone, and “PAGING” will display on the LCD display.
Press / / on any handset, or press on the base station again to
stop paging.
note
If there is an incoming call during paging, the phone will ring with the incoming call
instead of paging.
4.10 Make an Internal Call
This feature is only applicable when there are at least two registered handsets. It
allows you to make internal calls, transfer external calls from one handset to another
handset and make conference calls. If the called handset is not answered within
60 seconds, the called handset will stop ringing and the calling handset will return to
idle mode.
4.10.1 Call Another Handset
In idle mode, press and the screen displays all registered handsets except the
calling handset.
Enter the desired handset number to intercom with.
The called handset rings and press on the called handset to establish the
internal call.
noteS
If only one handset is registered to the base station, press and it will display
“NOT POSSIBLE”.
If only two handsets are registered to the base station, press will connect to
another handset immediately.
4.10.2 Call All Handsets
In idle mode, press and the screen displays all registered handsets..
Press 9 to ring to all registered handsets.
1.
2.
3.
4.
1.
2.
1.
2.
3.
•
•
1.
2.

VTech LS6185A Specifications

General

Brand	VTech
Model	LS6185A
Category	IP Phone
Language	English