5
SET UP THE TELEPHONE
2.4 Install and Charge the Handset Batteries
Slide open the battery compartment cover.
Place the battery pack into the battery compartment, with the battery connector
plugged in, as shown.
Slide the battery compartment cover back until it clicks into place.
Place the handset on the base charging cradle to charge for at least 14 hours.
A beep indicates that the handset is properly placed on the base.
noteS
Use only the supplied NiMH rechargeable batteries.
If you do not use the handset for a long time, disconnect and remove the batteries
to prevent possible leakage.
1.
2.
3.
4.
•
•
To Next Page
Loading...
