VTech LS6185A User Manual

26
8.2 Handset Settings
8.2.1 Alarm
You can use this phone to set an alarm clock. When an alarm is set,
displays on
the LCD display. When the alarm time is reached,
and “ALARM ON” ash on the
screen. The handset also rings for 45 seconds.
noteS
You can press any key to turn off the alarm. If, however, the snooze function is
activated, the alarm will sound again at the end of the snooze period of seven
minutes until you go into alarm settings and turn it off. Your may also press to
terminate the snooze function.
Key press is still applicable if handset keypad is locked and when the alarm time is
reached.
The alarm volume level is the same as the settings of the handset ringer volume. If
the handset ringer is set to VOLUME OFF, the alarm still sounds at the VOLUME 1
level.
During an external call or an internal call, if an alarm is set and when the alarm
time is reached, “ALARM ON” will still ash. An alarm tone will be emitted from the
earpiece to notify you the alarm time is reached. Once you press any key or
press and hold to disable the alarm, it will revert to the call duration screen.
During paging or ringing, the alarm will not sound when the alarm time is reached.
However, if snooze function is enabled, the alarm will sound again at the end of
the snooze period provided that it’s not ringing or in paging mode at the end of the
snooze period.
Press and then to select HS SETTINGS.
Press and then to select ALARM.
Press and then to select ON/OFF.
Press to conrm.
If ON is selected:
Press and then use the keypad to enter the time.
Press to conrm. The display shows the current time and date, and you are
prompted to set the snooze function.
Press and then to select ON or OFF.
Press to conrm.
•
•
•
•
•
1.
2.
3.
4.
1.
2.
3.
4.

VTech LS6185A Specifications

General

Brand	VTech
Model	LS6185A
Category	IP Phone
Language	English