1. Press X/DELETE twice when the telephone is not in use.
2. To delete all old messages with a handset:
3. Press MENU/SELECT when the handset is not in use.
4. Scroll to >Answering sys and then press MENU/SELECT.
5. Scroll to >Delete all old and then press MENU/SELECT twice.
Call screening
Call screening at the telephone base:
If the answering system and call screening are on, the announcement and the incoming message broadcast at the
telephone base when a call is answered by the answering system.
Options while recording a message:
Press /VOL or /VOL on the telephone base to adjust the call screening volume.
Press /PLAY/STOP to temporarily silence the call screening.
Call screening at the handset:
If the answering system is on, the announcement and the incoming message broadcast at the telephone base when
a call is answered by the answering system. The handset shows To screen call, press [SELECT]. Press
MENU/SELECT to screen the call on your handset and the handset displays the caller ID information. If you do not
subscribe to caller ID service, the handset shows Screening…
Call intercept
If you want to talk to the person whose message is being recorded, press /FLASH or /SPEAKER on the handset.
Access the answering system remotely
1. Dial your telephone number from any touch-tone telephone.
2. When the system plays your announcement, enter the two-digit remote code. The preset code is 19.
3. You can enter one of the following remote commands.
To Next Page
Loading...
