1. When the desired entry displays, press MENU/SELECT.
2. When the screen displays EDIT NUMBER, use the dialing keys to edit.
3. Press MENU/SELECT.
4. When the handset displays EDIT NAME, use the dialing keys to edit.
5. Press MENU/SELECT to save.
6. To delete a directory entry:
7. When the desired entry displays, press MUTE/DELETE.
8. When the handset displays Delete contact?, press MENU/SELECT.
Speed dial
You can copy up to 10 directory entries into the speed dial locations so that you can dial these numbers using fewer
keys than usual.
To store a speed dial entry:
1. Press MENU/SELECT when the handset is not in use.
2. Scroll to >Directory, then press MENU/SELECT.
3. Scroll to >Speed dial, then press MENU/SELECT.
4. Scroll to a desired speed dial location, then press MENU/SELECT.
5. Scroll to a desired directory entry, then press MENU/SELECT to save.
To dial a speed dial entry:
Press and hold a speed dial key (0-9) of the desired entry when the handset is not in use, the number will be dialed
automatically.
To delete a speed dial entry:
When the desired entry displays, press MUTE/DELETE.
Caller ID
This product supports caller ID services provided by most telephone service providers. Depending on your service
subscription, you may see the caller’s name, number, date and time of calls that are sent by your telephone service
provider after the first or second ring.
Caller ID log
The caller ID log stores up to 50 entries. If you answer a call before the caller information appears, it will not be saved
in the caller ID log.
The handset displays XX Missed calls when there are calls that have not been reviewed in the caller ID log.
If you want to erase the missed call indicator, press and hold OFF/CANCEL on the idle handset.
To review and dial a number in the caller ID log:
1. Press CID/ when the handset is not in use.
2. Scroll to browse through the call log. When the desired entry appears:
3. Press # (pound key) repeatedly to show different dialing options.
4. Press 1 repeatedly to add or remove 1 in front of the telephone number.
5. Press /FLASH or /SPEAKER to dial the displayed number.
To delete the caller ID log entries:
Delete one entry: When the desired caller ID log entry displays, press MUTE/DELETE.
Delete all entries: Press MENU/SELECT when the handset is not in use. Scroll to >Caller ID log and then press
MENU/SELECT. Scroll to >Del all calls and then press MENU/SELECT twice.
About answering system and voicemail
Your telephone has separate indicators for two different types of voice messages: those left on the built-in answering
system and those left at your telephone service provider’s voicemail. Each alerts you to new messages separately.
If XX New messages and display on the handset and the message window on the telephone base flashes, there
are messages recorded on the built-in answering system.
The total recording time is approximately 14 minutes. It can record and store up to 99 messages and the
recording time of each message depends on the message length you set.
If New Voicemail and display on the handset, your telephone service provider is indicating that it has new
voicemail for you. Contact your telephone service provider for more information on how to access your
To Next Page
Loading...
