If you are replacing a handset on a system that has the maximum number of registered handsets or
wish to change the assigned handset number of your registered handsets, you must rst de-register
the handsets, then re-register all handsets.
To de-register all handsets
1. Press and hold FIND HANDSET on the main telephone base for 10 seconds.
2. When the IN USE light starts to ash, release the FIND HANDSET button.
3. Press and release FIND HANDSET again. The IN USE light will turn off and in a few seconds,
all handsets will be de-registered.
4. All handsets will show NOT REGISTERED.
NOT REGISTERED
Registration
• If the de-register
process does not
work you may
need to reset
the system and
try again. To
reset: pick up
the handset and
press .
Press the OFF
button and place
the handset back
into the telephone
base.
To Next Page
Loading...
Need help?
General
