• If the battery has
not been charged,
place the handset
in the telephone
base, and allow
it to charge for at
least 16 hours.
• Use only the
VTech power
supply provided
with your
telephone.
Connect power to telephone base/handset chargers
1. Plug the power adaptor into an electrical outlet not controlled by a wall switch, and the
connector into the power jack on bottom of the telephone base.
AC power outlet
Telephone outlet
Installation
2. Choose the location for your charger, and plug its power supply into an electrical outlet.
Connect to phone line
Plug one end of the telephone line cord into the telephone line jack at the bottom of the telephone
base Then plug the other end of the cord into the wall telephone outlet
AC power outlet
Getting started
To Next Page
Loading...
Need help?
General
