Caller ID
Review caller ID
You can enter caller ID review mode by pressing when the
handset is idle, the handset will enter caller id review mode. Or:
• With the handset idle (off), press MENU.
• Press to scroll to CALL LOG.
• Press SEL. Use and to scroll through the call log entries.
When the beginning or the end of the call log is reached, a
double beep will sound.
• If the call log is full, the oldest entry is deleted to make room
for the new call. If the call log is empty the following message
is displayed when you try to review CID records:
Store caller ID in your directory
• Follow the steps in Review caller ID (above) to nd the record
to be stored.
• The phone number in the caller ID log was sent by the phone
company. You may have to dial the number differently. Press
the # key repeatedly to see the different dialing options. You can
add or remove the initial 1 and/or the area code. The various
dialing options are:
• Press SEL to store the displayed number.
• If the caller ID record contains both name and number, the name
and number will be stored after pressing SEL.
• If the record does not contain a name, you will be prompted to
EDIT NAME and the screen will show:
>CALL LOG
RINGER VOLUME
EDIT NAME
VTech Com_
CALL LOG EMPTY
• Press OFF any
time to exit the
caller ID log.
• All handsets
share a common
caller ID log,
stored in the
base, If a call
log entry is
deleted, it will
disappear from
all handsets.
595-9511
1-595-9511
800-595-9511
1-800-595-9511
To Next Page
Loading...
Need help?
General
