VTech MobiGo 2 Touch Learning System - Getting Started with MobiGo 2; Battery Installation Guide

G
E
T
T
I
N
G
S
T
A
R
T
E
D
Battery InstallationBattery Installation
• MakesuretheunitisturnedOFF.
• Locatethebatterycoversonthebackoftheunit.
• Removethecoversasillustrated.
• Insert 4X1.5V size AA AM-3 or LR6 batteries
(not included) as illustrated.
• Makesuretoreplacethebatterycovers.
BATTERY NOTICE
• Installbatteriescorrectlyobservingthepolarity(+, -) signs to avoid leakage.
• Non-rechargeablebatteriesarenottoberecharged.
• Rechargeablebatteriesareonlytobechargedunderadultsupervision(ifremovable).
• Rechargeablebatteriesaretoberemovedfromthetoybeforebeingcharged
(if removable).
•Donotmixoldandnewbatteries.
•Do not mix batteries of different types: alkaline, standard (carbon-zinc) or
rechargeable (Ni-MH).
•Removethebatteriesfromtheequipmentwhentheunitwillnotbeusedfor
an extended period of time.
•Alwaysremoveexhaustedbatteriesfromtheequipment.
•Donotdisposeofbatteriesinfire.
• Donotattempttorechargeordinarybatteries.
• Thesupplyterminalsarenottobeshort-circuited.
NOTE: When the MobiGo
®
2 is running on batteries,
you may see this icon appear on the screen . This
indicates that battery power is low, and you should replace
the batteries soon. Battery time remaining once the icon
firstappearsisapproximately10-30minutes,dependingon
the type of batteries in use.
To preserve battery life, MobiGo
®
2 will automatically turn
offafterseveralminuteswithoutinput.PresstheON/OFF
button to turn the MobiGo
®
2 on again.
3
135800 MobiGo2 M 20120510.indd 3 2012-5-30 10:17:11