Network Wi-Fi
Wi-Fi router 2.4GHz 802.11 b/g/n
Internet connection 1.5 Mbps @ 720p or 2.5 Mbps @1080p upload bandwidth per baby unit
Overview
Baby unit overview
1. Light sensor
2. Camera lens
3. Microphone
4. Infrared LEDs
• Allow you to see clearly in a dark surroundings.
5. LED indicator
• Orange is steady on when the baby unit is connecting to the parent unit directly in local mode.
• Green is steady on when the baby unit and parent unit are connecting to your home Wi-Fi network via the Wi-Fi router.
• Flashes orange slowly during video streaming in local mode.
• Flashes green slowly during video streaming via home Wi-Fi network.
6. ON
• Power on/off switch.
7. Speaker
8. Power jack
9. Temperature sensor
10. Slots for wall mounting
• Wall mount bracket is included in your package.
11. PAIR
• Reset the baby unit to factory default.
1. Press and hold PAIR key until you hear a beep sound.
2. Release the PAIR key, and then press the PAIR key again five times until you hear another beep sound.
3. The baby unit will sound another beep when the reset completes. Then, the baby unit will reboot.
Parent unit overview
1. LINK LED light
• On when the parent unit is linked to the baby unit.
• Flashes when the link to the baby unit is lost.
To Next Page
Loading...
Need help?
General
