VTech RM5764HD User Manual

You can reset the parent unit by pressing the RESET key at the back of the unit.
Use a pin and insert it into the hole on the back of the parent unit, and then press the button inside.
Test the sound level and position the HD video monitor
NOTES
This HD video monitor is intended as an aid. It is not a substitute for proper adult supervision, and should not be used as such.
Testing the sound level of the HD video monitor
CAUTION
For hearing protection, make sure the parent unit is more than 3 metres away from the baby unit. If you hear any high-pitched noise from the parent unit, move
the parent unit further until the noise stops. You can also press – VOL on the parent unit to lower or mute the noise.
Increase the parent unit speaker volume if you cannot hear the sounds transmitted from the baby unit.
Positioning the HD video monitor
Keep the baby unit out of the reach of your baby. Never place or mount the baby unit inside the baby’s crib or playpen.
1. Place the baby unit more than 1 metre away from your baby.

VTech RM5764HD Specifications

General

Display Size	5 inches
Camera	Yes
Night Vision	Yes
Two-Way Talk	Yes
Wi-Fi	Yes
Temperature Sensor	Yes
Range	Up to 1, 000 feet
Soothing Sounds and Lullabies	Yes
Sound Activation	Yes
Power Source	Rechargeable battery
Number of Cameras	1
Expandable	Up to 4 cameras
Vibration Alert	Yes
Lullabies	Yes
Wall Mountable	Yes
Resolution	HD
Battery Life	Up to 12 hours