VTech T1100 - Speed Dial Memory Location

30
To dial a number in a one-touch memory location
To dial a number in a one-touch memory location, lift the
handset and then press a one-touch key (M1, M2 or M3).
sPEED DIAL MEMORY LOCATION
You can store up to 10 numbers in the speed dial memory
locations (0 through 9). Each location can hold a number
up to 32 digits.
To store a number in a speed dial memory location:
Lift the handset and press PROG.
Use the dialing keys to enter the number you want to
store. Press PAUSE once to add a three-second pause
in the dialing sequence, twice for a six-second pause
and so on.
Press MEMORY, then press the dialing key
(0 through 9) where you want the number to be
AX Pro, where X is
the memory location.
1.
2.
3.
Notes:
When you store a new number in a one-touch
memory location, the old entry is replaced and
cannot be retrieved.
If no action is taken within 10 seconds, the
telephone returns to idle mode automatically
without saving your selection.
•
•