VTech T1100 - Language

35
You can program up to four local area codes. Do not
program area codes for which you must dial 1.
Press OPTION/SELECT repeatedly until you see
LOCAL AREA CODE?.
Press
or 
code in LAC 1.
Press DISPLAY DIAL to move on to set the next digit.
Repeat steps 2 and 3 for the second and third digits
of your local area code.
Press OPTION/SELECT to save the local area code
and move to the next local area code (LAC 2, LAC 3,
or LAC 4).
- OR -
Press CLEAR to exit without saving your selection
and return to idle mode.
LANGUAGE
This telephone comes factory set for English displays. If
you wish to change the displayed language to Spanish or
French, follow the steps below:
Press OPTION/SELECT repeatedly until the screen
displays SET LANGUAGE.
Press
or to select the desired language
(ENGLISH, FRANCAIS or ESPANOL).
Press OPTION/SELECT. The screen displays
CONFIRM?
Press OPTION/SELECT 
move to the idle screen.
- OR -
Press CLEAR to exit without saving your selection
and return to idle mode.
1.
2.
3.
4.
5.
1.
2.
3.
4.