6
Connect the handset to the telephone.
Plug one end of the coiled handset cord into the handset jack on the left side of
the telephone base. Plug the other end of the coiled cord into the handset, then
place the handset on the telephone.
4.
Check for dial tone.
Lift the handset and listen for a dial tone. If you cannot hear a dial tone, press
VOLUME
. If you still do not hear a dial tone, see the Troubleshooting section
of this manual.
Your telephone will work immediately after installation using the default
feature settings (see default settings in Feature summary ).
5.
Getting started
Installation options
To Next Page
Loading...
