VTech T1300 User Manual

18
Speed dial
Store a number in a speed dial location
There are 14 speed dial locations (seven upper and
seven lower). To access an upper location, press
a speed dial key. To access a lower location, press
LOWER, then press a speed dial key.
Access the desired speed dial location, as
described above.
Enter the telephone number you want to store
(up to 24 digits). Press CALL LIST
to backspace
and make corrections.
-OR-
Press REDIAL to store the last number dialed
(up to 24 digits).
Press PROG to save the entry in the location you
pressed in step 1. The screen displays STORED.
NOTES:
If the speed dial location you pressed in step 1
is occupied, delete the number before storing a
new number.
If the number you entered is over 24 digits, the
screen displays ONLY 24 ALLOWED.
Store a  speed dial entry
While editing numbers, press CALL LIST
to storeto store
a pause in the dialing sequence (P displays). Press
RECALLF
displays).
Store a call history number in a speed dial location
Press CALL LIST
or CALL LIST to scrollto scroll
through the call history.
Press PROG, then press a speed dial key.
-OR-
Press PROG, then press LOWER and a
speed dial key to store the number. The screen
displays STORED.
NOTE: If the speed dial location you pressed in
step 2 is occupied, the new telephone number
replaces the old one. Take caution not to replace
entries you do not wish to delete from the speed
dial locations.
1.
2.
3.
•
•
1.
2.
Speed dial

VTech T1300 Specifications

General

Brand	VTech
Model	T1300
Category	Telephone
Language	English