Getting started
5
Installation options
The telephone base comes with the mounting bracket already installed for
tabletop use. If you want to mount your telephone on a wall, use the provided
wall bracket to connect with a standard dual stud telephone wall-mounting
plate. If you do not have this mounting plate, you can purchase one from many
hardware or consumer electronic retailers. You might need a professional to
install the mounting plate.
If you subscribe to high-speed Internet service (DSL - digital subscriber line)
through your telephone line, you must install a
Calling Number Display problems caused by DSL interference. Please contact
Tabletop installation
Follow the instructions to install your telephone to tabletop position.
Check the mounting bracket.
The telephone’s mounting bracket is positioned for tabletop use. Make sure it
is secure by pressing the two feet.
1.
Connect one end of the telephone line cord to the jack labeled TEL on the
back of the telephone.
2.
3.
Telephone wall jack
included) is required
if you have DSL
high-speed Internet
must be plugged into
the telephone wall
jack.
Telephone
line cord
To Next Page
Loading...
