VTech VM320 User Manual

· The selected lullaby plays for 30 minutes and stops automatically. · The lullaby playback on the baby unit will be paused
when receiving talkback from the parent unit.
Screen off timer
You can set the screen off time for the parent unit when there is no key press for a specific time interval. When the screen is
turned off, you can still hear sound from the baby unit.
1. Press when the parent unit is idle.
2. Press or to choose , then press or to open the submenu.
3. Press or to choose the desired time period to automatically turn off screen ( / – 5 min./ – 30 min. / – 60min.), then press to
confirm your selection.
Adjust the sound sensitivity of the baby unit
You can choose to hear sounds from the baby unit all the time, or to hear sounds that exceed a certain level. You can use the
parent unit to adjust the microphone sensitivity of your baby unit. The higher the sensitivity level, the more sensitive the baby
unit is in detecting sounds for transmitting to the parent unit. The VOX sensitivity level is preset to the highest level (Level 5).
VOX Sensitivity level
Level 5
Level 4
Level 3
Level 2
Level 1
Sensitivity Highest VOX High VOX
Medium VOX Low VOX
Lowest VOX
sensitivity level sensitivity level sensitivity level sensitivity level sensitivity level
Description
The parent unit speaker is constantly on, and you will hear all sounds (including background noises) from your baby’s room.
The parent unit speaker turns on for soft babbling and louder sounds from your baby. It remains quiet when your baby sleeps
soundly.
The parent unit speaker turns on for loud babbling and louder sounds from your baby. It remains quiet when your baby makes
soft sounds.
The parent unit speaker turns on for crying and louder sounds from your baby. It remains quiet when your baby makes soft
sounds.
The parent unit speaker turns on for loud crying or screeching sounds from your baby. It remains quiet when your baby makes
soft sounds.
1. Press when the parent unit is idle.
2. Press or to choose , then press or to open the submenu.
3. Press or to choose the desired sensitivity level, then press to confirm your selection.
Note
· As long as the Sound-activated screen setting is ON, the screen will turn on automatically when VOX sensitivity is triggered,
despite it was off earlier.
Tip
· If you want to use a sound machine or white noise machine for natural white noise while using this baby monitor to check on
your baby, you can: – Lower the volume of your sound machine or white noise machine; or – Lower the sensitivity level of your
baby monitor to medium (level 3) or below. Default level is the highest level.
Turn on or off the sound activation
When sound activation is on, as long as no sound is detected within 50 seconds, the parent unit screen will turn off
automatically to save power.

VTech VM320 Specifications

General

Brand	VTech
Model	VM320
Category	Baby Monitor
Language	English