3. Microphone
4. Camera
5. Infrared LEDs
6. Light sensor
7. ON/OFF switch
· Slide to turn on or off the baby unit.
8. Speaker
9. Power jack
10. Wall mount holes
Frequency control Transmit frequency Channels LCD Nominal effective range Power requirements
Crystal controlled PLL synthesizer
Baby unit: 2405 – 2475 MHz Parent unit: 2405 – 2475 MHz
32
2.4″ Color LCD (QVGA 320×240 pixel)
Maximum power allowed by FCC and IC. Actual operating range may vary according to environmental conditions at the time
of use.
Parent unit: 3.6V Ni-MH battery Baby unit power adapter: Output: 6V DC @ 400mA Parent unit power adapter: Output: 6V DC
@ 400mA
Technical specifications
Parent unit overview
1. POWER LED light · On in green when the parent unit is powered on and linked to the baby unit. · Flashes when the link
to the baby unit being viewed is lost.
2. TALK · Press and hold to talk to the selected baby unit.
3. Arrow keys and VOL / VOL
VOL / · Press to increase the parent unit
speaker volume. · While in a menu, press to scroll up,
or to enter an item’s sub-menu. · While zooming, press and hold to
move the zoomed image upward.
VOL / · Press to decrease the parent unit
speaker volume. · While in a submenu, press to scroll
down. · While zooming, press and hold to
move the zoomed image downward.
· While in a menu, press to choose the next item on the left.
· While zooming, press and hold to move the zoomed image leftward.
· While in a menu, press to choose the next item on the right.
· While zooming, press and hold to move the zoomed image rightward.
4. MENU/SELECT · Press to enter or exit the menu. · While in a sub-menu, press to choose an item, or save a setting.
5. Microphone
6. Battery indicator · On in red when the battery is charging. · Flashes when the battery is low.
7. Visual sound indicators
The visual sound indicators can show the sound level detected by the baby unit. Sound level detected by the baby unit
One to three green lights indicate a moderate sound level detected by the baby unit.
Additional red lights indicate a higher sound level detected by the baby unit (e.g. baby crying loudly).
LCD off/ back
Press to turn off LCD and keep the sound broadcast.
Press to return to the previous screen.
9 LCD display 10 Speaker 11 Stand 12 ON/OFF switch
· Slide to turn on or off the parent unit. 13 Power jack
Parent unit icons
To Next Page
Loading...
