VTech VM5463 - Main Menu Icons

10
11
Parent unit icons
Alert settings
• Turn on/off Low battery alert tone.
• Turn on/off Link lost alert tone.
• Turn on/off Confirmation alert tone.
Projection
/
Turn on/off projection light
• Set timer to turn the projection light off.
• Auto turn on the projection light when baby unit detects sound. It
will turn off after 15 minutes of no sound detection.
See Sound sensitivity and sound activation section to learn more.
Temperature
/
• Turn on/off temperature alert tone.
• Set the parent unit to beep whenever the room temperature
detected by the baby unit falls outside of the set temperature
range.
• Set the minimum temperature.
• Set the maximum temperature.
• Set temperature display in Fahrenheit (
o
F) or Celsius (
o
C)
Main
menu
Sub-menu
Brightness
• Adjust the parent unit’s LCD screen brightness.
Camera settings
Baby unit speaker volume
• Adjust the baby unit’s speaker volume.
Lullaby
/
Play/Stop lullaby
• Select one of the soothing sounds, or white noise.
• Select one of the five melodies.
• Play all melodies.
• Set timer to stop playing the selected melody or soothing sound.
Main menu icons
Night light
/
Turn on/off night light
4
5
6
7
• Select one of the 7 night light colors.
• Select for the night light to cycle through all 7 colors automatically.
• Set the timer to turn the night light off.
• Set the night light to turn on automatically when the baby unit
detects sound. It will turn off after 15 minutes of no sound
detection. You can set VOX sensitivity level to detect sounds
that only exceed certain levels. See Sound sensitivity and sound
activation.
A
/
• Turn on/off the adaptive night light feature. When this feature is
on, the baby unit detects the ambient light. If the room is bright,
the night light adjusts itself to be brighter; if the room is dim, the
night light adjusts itself to be dimmer.