14
15
Sound sensitivity and sound activation
Sound activated screen and audio
Adjust sound detection sensitivity
The parent unit screen automatically
stays off to save power when the baby
unit does not detect any sounds. When
Sound activation is turned on, once the
baby unit detects sounds that are louder
than the chosen sound sensitivity level,
the parent unit screen and speaker turn
on automatically. The parent unit will then
turn off again after 50 seconds of no sound
detection.
Note
• If you have muted the parent unit speaker, only the parent unit screen will turn on when a sound is
detected.
When you turn on Sound activation, you can adjust the baby unit’s VOX Sensitivity to detect
sounds and turn on the parent unit when its screen is switched off or dimmed.
When the baby unit detects sounds that exceed certain levels, the parent unit screen will
automatically turn on and the baby unit will transmit the detected sounds to the parent unit.
You will then be able to see and hear your baby.
If you have turned on the Night light Auto-on feature, it will turn on automatically to sooth
your baby.
If you turn off Sound activation, you will hear sounds from the baby unit all the time, even
when the parent unit screen is switched off.
VOX Sensi-
tivity level
Level 5
(Highest)
Level 4
(High)
Level 3
(Medium)
Level 2
(Low)
Level 1
(Lowest)
Description
(Default setting)
The parent unit
screen and
speaker turn on
for very quiet
sounds, includ-
ing background
noises from your
baby’s room.
The parent
unit screen
and speaker
turn on for soft
babbling and
louder sounds
from your baby.
The parent unit
remains quiet
when your
baby sleeps
soundly.
The parent unit
screen and
speaker only
turn on for loud
babbling and
louder sounds
from your baby.
The parent unit
remains quiet
when your baby
makes soft
sounds.
The parent unit
screen and
speaker only
turn on for cry-
ing and louder
sounds from
your baby. The
parent unit
remains quiet
when your
baby makes
soft sounds.
The parent
unit screen
and speaker
only turn on
for loud crying
or screeching
sounds from
your baby. The
parent unit
remains quiet
when your baby
makes soft
sounds.
Night vision
The baby unit has infrared LEDs that allow
you to see your baby clearly at night or in
a dark room. When the baby unit detects
low light levels, the infrared LEDs switch on
automatically. The images from the baby
unit is then in black and white, and
appears on the screen.
Notes
• It is normal to see a short white glare on
your parent unit screen as the baby unit
adapts to the dark environment.
• When the infrared LEDs are on, it is normal
for the images to be in black and white.
Tip
• Depending on the surroundings and other
interfering factors, for example, lighting,
objects, colours and backgrounds, the
image quality may vary. Adjust the baby
unit angle or place the baby unit at a higher
location to prevent glare and a blurred
display.
Dim mode
Dim mode helps you save parent unit power. Your parent unit display will automatically
dim after 10 minutes of inactivity, when no keys are pressed or alerts are received from
the baby unit.
10 mins inactive
Press any button
To Next Page
Loading...
