VTI Instruments Corp.
134 EX1200 Triggering
FIGURE 7-23: COMPLETED CONTROLLER AND DMM UPGRADE
During a plug-in module firmware upgrade, an Upgrade Status window similar to the one shown
in Figure 7-24 appears. A step will appear for each plug-in module installed in the mainframe.
Each plug-in module takes approximately one minute to upgrade. Upon completion of the
upgrade, a hard power cycle is required in order for the upgrade to take affect. Note that clicking
the Reboot button will not be sufficient for this operation.
FIGURE 7-24: COMPLETED PLUG-IN MODULE FIRMWARE UPGRADE
To Next Page
Loading...