15
Insert the Long Shade Tube (L2) and
Short Shade Tube (L4) into the Large
T-Joiner as indicated below.
Important: You must
attach the Shade Tubes
as directed, otherwise the
Shade Cover will be very
difficult to fit.
15
STEP
Long
Shade
Tube
Short
Shade
Tube
Long Shade Tube
Short Shade Tube
Small tube ends facing this way
A.
B.
C.
D.
Insert a Joiner Tube (F2) into the top of both Lower Outer Tubes (F3), and insert Feet (F5) into the bottom.
Note: Use the provided Allan key to align the Joiner Tube.
Insert a T-Joiner (C2) into the wider ends of both Upper Outer Tubes (F1).
Connect two pairs of completed parts from 16A and 16B together.
Repeat for the remaining 3 sets of Outer Tubes, Joiner Tubes and Feet.
16
STEP
F1
F2
F3
C2
F5
Note: If you are finding it difficult to
fully insert the grub screw flipping the
Large T-Joiner might solve this.
A.
B.
L2
L4
To Next Page
Loading...
Need help?
General
