To Next PageTo Next Page
Need help?Do you have a question about the VWR International 1370F and is the answer not in the manual?
General| Brand | VWR International |
|---|---|
| Model | 1370F |
| Category | Oven |
| Language | English |
Inspect for visible exterior damage upon delivery and note on freight bill.
Confirm that all included accessories, such as leveling feet and shelves, are present.
Save shipping crate and contact customer service for return authorization and details.
Explains common graphic symbols used on the oven controls and their meanings.
Details electrical power needs, voltage requirements, and circuit recommendations.
Guidance on choosing a suitable location, avoiding heat/cold, and ensuring proper airflow.
Safe methods for lifting and moving the unit, emphasizing proper lifting devices.
How to use leveling feet for stable and solid placement of the oven.
Procedures for initial cleaning and a burn-in process to remove protective coatings.
Essential safety rules including not using the chamber bottom as a work surface.
Prohibits combustible materials, explosive units, and handling of noxious fumes.
Precautions regarding power supply, grounding, adapter plugs, and location classes.
Description of the main power switch and the timer control switch.
Function, adjustment, and reset procedure for the overtemperature safety control.
Details on the digital display, arrow pads, and buttons for timer functions.
Function of the main temperature set point control and related indicator lights.
Steps for connecting power, setting safety thermostat, and initial startup.
How to set and adjust the desired oven temperature using arrow pads.
Procedure for ensuring accurate temperature readings using an independent thermometer.
Adjusting the safety thermostat to prevent overheating and activate the OTP light.
Setting hours, minutes, and activating timed operation cycles.
Recommended procedures for cleaning the oven chamber and door gasket.
Steps for preparing the unit for storage, including drying and securing the door.
Diagnosing and resolving issues with temperature being too high or too low.
Troubleshooting display readings like 'HI'/'LO' and unit heating failures.
Addressing issues with the unit not heating at all or maintaining a stable temperature.
Troubleshooting mechanical issues such as motor problems or door sealing.
Resolving issues with the unit not powering on or smoking during initial operation.
Details of the product's limited warranty, coverage, exclusions, and duration.
