To Next PageTo Next Page
Need help?Do you have a question about the VWR International 1350GM and is the answer not in the manual?
General| Brand | VWR International |
|---|---|
| Model | 1350GM |
| Category | Oven |
| Language | English |
Inspect for visible and concealed exterior and interior damage.
Verify accessories and follow procedures for unit returns.
Symbols indicating potential hazards and safety precautions.
Symbols representing operational functions like power, timer, and temperature.
Details on power requirements, location selection, and airflow needs.
Instructions for safe unit handling, leveling, and initial cleaning.
Recommended process to remove element coating smoke.
Rules for safe operation, including ventilation and hazardous materials handling.
Precautions for electrical work and mercury handling.
Description of main power and timer switch functions.
Explanation of Overtemperature Safety Thermostat, OTP light, and reset button.
Details on setting and activating timed heat cycles.
Control for setting and calibrating chamber temperature.
Indicator light for heating element activation.
Steps for connecting power and performing initial device setup.
Procedure for entering and adjusting the desired temperature set point.
Guide for ensuring accurate temperature readings via calibration.
Instructions for configuring the overtemperature safety thermostat.
Setting hours, ten minutes, and one minute functions for timed operation.
How to start and manage timed heating cycles.
Guidelines for regular cleaning and decontamination of the oven.
Steps for preparing the unit for storage.
Diagnosing and resolving problems with temperature regulation.
Interpreting and addressing display readouts like HI or LO.
Troubleshooting unit not heating correctly or to the set point.
Resolving issues where the unit won't heat up or maintain set point.
Addressing fluctuations or instability in chamber temperature.
Resolving display/thermometer mismatches and calibration issues.
Troubleshooting motor operation and door sealing.
Addressing situations where the controller becomes unresponsive.
Resolving timer resets and unresponsive front panel displays.
Troubleshooting power, startup, and initial smoking issues.
Addressing contamination and airflow issues.
