EasyManua.ls Logo

VWR International 1430 User Manual

Default Icon
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
VACUUM
OVEN
MODEL: 1410,1430
INSTALLATION AND OPERATIONAL MANUAL
Sheldon Manufacturing Inc. P.O. Box 627 Cornelius, Oregon 97113
EMAIL: tech@Shellab.com
INTERNET: http://www.Shellab.com/~Shellab
1-800-322-4897 (503) 640-3000 FAX (503) 640-1366
Question and Answer IconNeed help?

Do you have a question about the VWR International 1430 and is the answer not in the manual?

VWR International 1430 Specifications

General IconGeneral
BrandVWR International
Model1430
CategoryOven
LanguageEnglish

Summary

Receiving and Inspection

Installation

Power Source Requirements

Connect to a compliant electrical supply circuit, verify voltage and amperage requirements.

Site Selection and Ventilation

Select an indoor location with proper ventilation, avoiding heat sources and direct sunlight.

Lifting and Handling Procedures

Use rated lifting devices, lift from bottom surfaces, secure unit to prevent tipping.

Control Panel Overview

Temperature Control

Manually adjustable dial (0-10) to set temperature. Clockwise increases temperature.

Precautions

Material and Container Safety

Do not use flammable materials or sealed containers in the oven.

Electrical and Grounding Safety

Ensure proper grounding and disconnect power before servicing.

Vacuum Operation

Operation

Setting Temperature

Use the 0-10 dial to set temperature; heating light indicates element activation.

Troubleshooting

Temperature Issues

Solutions for temperature too high, too low, or unstable conditions.

Heating Failure

Check controller, amperage, and vacuum seal if unit will not heat up.

Service Safety

Electrical Disconnection

Always disconnect the power supply before performing any maintenance or service.

Related product manuals