!
Connecting pipe
The connecting pipe transports the sample gas from the extraction site to the SGA 003 gas
preparation system. When ordering, please specify the desired length for the connecting pipe
(Appendix H).
The connecting pipe, which is supplied by Swagelok or DK-Lok, is made of a stainless steel
pipe with a diameter (ø) of 6mm and the interior surface of the pipe is chemically polished.
Swagelok or DK-Lok connectors (respectively) are used to attach the pipe
Dielectric inserts
(Appendix H, position 4)
The use of dielectric inserts ensures the electrical insulation between the connecting pipe
and the gas pipeline, and is mounted immediately before the SGA.
To Next Page
Loading...