Need help?Do you have a question about the W Box 0E-8CHNVR2TB and is the answer not in the manual?
Explains how the NVR automatically adds IP cameras connected via PoE network interfaces.
Process for the NVR to automatically detect and add online cameras on the network.
Steps to manually add a camera by entering its network details and credentials.
Sets the recording schedule for cameras, including enabling recording and audio.
View disk capacity, status, SN code, and format the disk.
Configures motion detection, including enabling it, setting event actions, and defining detection areas.
Configures the NVR's IP address, ports, and PoE settings for network connectivity.
Configures Dynamic Domain Name System for accessing the NVR remotely.
Configures email settings for sending alarm notifications.
Configures Peer-to-Peer (P2P) connection for simplified remote access.
Configure general system settings such as device name, output resolution, and language.
Configure system date, time, time zone, and Daylight Saving Time (DST).
Add, modify, and delete users, setting their privileges and advance settings.
Procedure for changing the system's administrator or user password.
General| Model | 0E-8CHNVR2TB |
|---|---|
| Channel Support | 8 Channels |
| Storage Capacity | 2TB |
| Video Compression | H.264 |
| Power Supply | 12VDC |
| Network Interface | Ethernet |
| Type | Network Video Recorder |
To Next Page
