Need help?Do you have a question about the W Box 0E-4CHNVR2TB and is the answer not in the manual?
General| Model | 0E-4CHNVR2TB |
|---|---|
| Storage Capacity | 2TB |
| Video Compression | H.264 |
| Power Supply | DC 12V |
| Channel Support | 4 channels |
| Network Interface | RJ45 |
| Type | NVR |
Provides crucial advice and warnings before using the NVR, emphasizing careful reading of the manual.
Explains the intended audience and how to effectively use the user manual for the NVR.
Details the recommended environmental conditions and safety precautions for installing the NVR.
Step-by-step instructions on how to correctly power on the NVR unit.
Instructions for safely shutting down and powering off the NVR.
Guide on accessing the NVR system by logging in with credentials.
Describes the process of connecting and adding IP cameras to the NVR.
Initial setup wizard for configuring network parameters like IP address and DNS.
Wizard screen for setting the device's date, time, and time format.
Wizard screen for selecting the appropriate time zone for the NVR.
Wizard screen to configure Daylight Saving Time (DST) settings.
Wizard step for initial camera configuration and addition.
Wizard screen for viewing and managing storage disks, including formatting.
Wizard screen for setting the output resolution for the NVR display.
Overview of the main menu accessed from the floating menu bar.
Describes the icons on the real-time video toolbar for window switching and playback.
Details the icons on the alarm menu quick toolbar for alarm management.
Introduction to the playback functionality for reviewing recorded video.
Instructions for searching recorded video by date and time.
Method for searching records using thumbnails divided by time.
How to access and search for alarm events.
Procedure for backing up recorded video data using a USB drive.
Overview of the main menu structure and its main categories.
Overview of managing connected cameras, including adding and deleting.
Steps to automatically discover and add online cameras to the NVR.
Instructions for manually adding cameras by entering their network details.
Procedure for removing a camera from the NVR's configuration.
Settings for video stream encoding, including resolution and bitrate.
Adjustments for picture quality like brightness, contrast, and sharpness.
Configuration for On-Screen Display elements like time and channel name.
How to mask specific areas in the video feed to protect privacy.
Setting up schedules for continuous or event-triggered video recording.
Managing storage disks, including viewing capacity, status, and formatting.
General settings for enabling alarms and setting duration time.
Configuring motion detection alarms, including sensitivity and event actions.
Setting up alarms for tampering with the camera lens or housing.
Configuring alarms to detect when a camera feed is lost.
Enabling and configuring advanced intelligent video analysis alarms.
Configuration for external alarm input signals.
Setting up alerts for device malfunctions.
Basic network configuration settings including IP, Subnet Mask, and Gateway.
Detailed configuration of IP address, Subnet Mask, and Gateway.
Configuration of network ports for web, data, and client access.
Settings related to Power over Ethernet functionality.
Setup for Dynamic Domain Name System to access NVR remotely.
Configuration for sending email notifications for alarms and other events.
Configuration for Universal Plug and Play for automatic port forwarding.
Settings for Peer-to-Peer connection for remote access.
Setting up rules to allow or prohibit access from specific IP addresses.
Displays detailed information about the NVR device.
General system settings including device name, output resolution, and language.
Configuration of system-wide parameters like device name and language.
Setting the system's date, time, and time format.
Selection of the appropriate time zone for the NVR.
Configuration for Daylight Saving Time (DST) adjustments.
Management of user accounts, including adding and deleting users.
Adding and managing user accounts with different privilege levels.
Advanced user settings such as auto login and password reminders.
Procedure for modifying the system's login password.
Settings for video display mode, layout, and dwell time.
Searching for and exporting system logs for troubleshooting.
System maintenance operations like shutdown, reboot, and configuration export.
To Next Page
