----End
7.7 Device Malfunction
Operation Description
Click Device malfunction in the main menu or menu of the alarm management screen
and choose Device malfunction to access the device malfunction screen, as shown in
Figure 7-8.
Figure 7-8 Device malfunction screen
Operation Steps
Step 1 Click to enable or disable the functions.
Step 2 Click Event type.
Step 3 Enable the event actions include: buzzer, alarm out, push message, pop up
message and send E-mail.
Step 4 Click Schedule page to access the schedule screen.
For details, please see 6.1 Record Schedule Step 4 Set the record schedule.
Step 5 Click Apply to save device malfunction settings.
----End
To Next Page
Loading...
