Operation Description
Click Camera tamper in the main menu or menu of the alarm management screen and
choose Camera tamper to access the camera tamper screen, as shown in Figure 7-4.
Figure 7-4 Camera tamper screen
Operation Steps
Step 1 Select a channel from the drop-down list of channel.
Step 2 Click to enable camera tamper.
Step 3 Enable the event actions include: buzzer, alarm out, push message, pop up
message, send E-mail and post recording.
Step 4 Click Schedule page to access the schedule screen.
For details, please see 6.1 Record Schedule Step 4 Set the record schedule.
Step 5 Click Copy and select a channel, then click OK to apply the parameter settings
to cameras of selected channels, click Apply to save camera tamper alarm
settings.
----End
7.4 Video Loss
If a camera is disconnected, it will trigger video loss alarm.
To Next Page
Loading...
