WABECO D3000 E - Leading Spindle Drive for D3000 E

14
2. Drawings and list of parts
2.4 Leading spindle drive for D3000 E
Part-No. Order-No. Designation
1 10300001 D.c. Motor
2 10300002 Toothed belt
3 10300003 Toothed belt pulley
4 10300004 Motor bearing
5 10300005 3 screws
6 10300006 Bracket
7 10300007 2 scres
8 10300008 2 adjusting nuts
9 10300009 Pressure ring
10 10300010 Bushing
11 10300011 2 thrust bearing
12 10300012 Run-on-ring
13 10300013 2 screws
14 10300014 Needle bearing
15 10300015 Distance ring
16 10300016 Needle bearing
17 10300017 Toothed belt pulley
18 10300018 Clutch disk
19 10300019 Handle
20 10300020 Operating pin
21 10300021 Threadcutting coupling