18
2.
Drawings and list of parts
2.6 Cross table
Part-No. Order No. Designation
311 10200311 Lower part of cross slide
3111 10203111 Nut holder
31111 10231111 Bolts + washers
31112 10231112 Bronze nut
3112 10203112 Bronze nut
3113 10203113 Shim
31131 10231131 Clamping bolt
3114 10203114 Wiper ring
3115 10203115 Lubricating nipple
312 10200312 Upper part of cross-slide
3121 10203121 Spindle bearing compl. with graduated ring
31211 10231211 Spindle
31212 10231212 Ball-ended crank
1141 102W1141 Hexagon socket
3122 10203122 Threaded pin + plain nut
3124 10203124 Threaded pin with thrust piece
3125 10203125 Readjusting gib
321 10200321 Lower part of turning carriage
322 10200322 Upper part of turning carriage
3221 10203221 Spindle bearing compl. with graduated ring
32211 10232211 Spindle for turning carriage
32212 10232212 Ball-ended crank
3222 10203222 Readjusting gib
3223 10203223 Stud bolt
32231 10232231 Clamping plate
32232 10232232 Hexagon bolt
32233 10232233 Pressure spring
32234 10232234 Thick nut
10200300 Longitudinal support compl.
Parts-No. 321 - 3112 - 3122 - 32211 - 32212 - 1141 - 3221 - 3222 - 322
- 3223 - 32232 - 32233 - 32231 - 32234
10200301 Transversal support compl.
Parts-No. 3124 - 31131 - 3112 - 3114 - 3115 - 31112 - 3111 - 31111 -
3122 - 312 - 3125 - 311 - 3113 - 31211 - 3121 - 31212 - 1141
10200302 Cross table compl
10200303 Spindle compl. with transversal support
Parts-No. 3121 - 31212 – 31211
10200304 Spindle compl. with longitudinal support
Parts-No. 3221 - 32211 – 32212
To Next Page
Loading...
