Foreword
2.5 Limitation of liability
10
Operator’s Manual | BS-4 | 5100060095 | 07/2022 | [en]
2.5 Limitation of liability
In the event of the following infringements, the manufacturer disclaims
any liability for personal injury and damage to property:
• Actions contrary to this operator’s manual.
• Non-designated use
• Deployment of untrained personnel.
• Use non-approved spare parts and accessories.
• Improper handling.
• Structural changes of any kind.
• Non-observance of the General Terms and Conditions (GTC).
2.6 Use of the operator’s manual
This operator’s manual:
• must be regarded as an integral part of the machine and must be
kept in a safe place throughout its service life.
• must be passed on to each subsequent owner or operator of this ma-
chine.
• applies to various machine types from one product range. For this
reason, some illustrations may differ from the appearance of the pur-
chased machine. Variant-dependent components that are not in-
cluded in the scope of delivery can also be described.
The manufacturer reserves the right to change the information in this op-
erator's manual without notice.
It must be ensured that any changes or additions made by the manufac-
turer are immediately incorporated into this operator’s manual.
Group - Type Material number (Mat. no.)
BS50-4As 11" 5100030599
BS50-4As 11“ 5100068310
BS60-4As 11" 5100030606
BS60-4As 11" 5100037562
BS60-4As 11“ 5100051581
To Next Page
Loading...
