Wacker Neuson BS-4

Operation
Select speed 8.2
31
[en] | 07/2022 | 5100060095 | BS-4 | Operator’s Manual
8.2 Select speed
A
B
C
PositionA: Stop, machine stands still.
PositionB: Idle, slow speed.
PositionC: Full speed, fast speed.
8.3 Taking the machine out of operation
CAUTION
Danger of burns due to hot surfaces!
The machine, engine and exhaust can heat up quickly after a short time;
that can lead to severe burns in case of contact with skin.
► Always allow the machine, engine and exhaust to cool down after
use.
► Use heat-resistant protective gloves if the cooling phase cannot be
maintained (e.g. due to an emergency).
1
A
ü The machine is on a level surface.
1. Move the throttle lever 1 into position A.
ð Fuel tap closes automatically.
ð The machine stops.
2. Allow the machine to come to a complete stop.
3. Let the machine and engine to cool down.
ð The machine is out of operation.
8