Safety
4.10 Maintenance
18
Operator’s Manual | BS-4 | 5100060095 | 07/2022 | [en]
WARNING
Hot exhaust!
Contact may cause burns.
► Only operate the machine if the safety features are correctly fitted.
► Do not change or remove safety devices.
Burn protection 1 protects the operator from contact with hot surface.
4.10 Maintenance
• The machine must not be serviced, repaired, adjusted or cleaned
when switched on.
• Observe maintenance intervals according to maintenance plan. Have
work that is not listed performed by a service partner.
• Replace worn or damaged machine parts immediately. Only use
spare parts from the manufacturer.
• Keep the machine clean.
• Replace any missing, damaged or illegible safety labels immediately.
Safety and information labels contain important information for the
protection of the operator.
• Carry out maintenance work in a clean and dry environment (e.g.
workshop).
4.10.1 Service
• Only have the machine repaired or serviced by technically trained
personnel.
• Only use original spare parts and accessories. The operational safety
of the machine is thus maintained.
To Next Page
Loading...
