Wacker Neuson BS-4

Technical Data
13.1 General instructions
46
Operator’s Manual | BS-4 | 5100060095 | 07/2022 | [en]
13 Technical Data
13.1 General instructions
Information
For system technical reasons, empty columns can be displayed in the
technical data, and numbers and letters that written in superscript or sub-
script may be displayed incorrectly, e.g:
► Sound power level LWA instead of L
WA
► Sound pressure level LpA instead of L
pA
► Vibration total value ahv instead of a
hv
► Carbon dioxide CO2 instead of CO
2
► Unit m/s2 instead of m/s
2
13.2 Noise and vibration data
The noise and vibration data listed have been determined in accordance
with the following guidelines for the typical machine operating conditions /
special test conditions and using harmonized standards:
• Machinery Directive 2006/42/EC
• Noise Emission Directive 2000/14/EC
During operational use, values may differ depending on the prevailing op-
erating conditions.
Sound pressure level at operator station
• L
pA
was determined according to EN ISO 11201 and EN 500-4.
Guaranteed sound power level
• L
WA
was determined according to EN ISO 3744 and EN 500-4.
Weighted vibration total value hand-arm vibration
• a
hv
was determined according to EN ISO 20643 and EN 500-4.
13.3 BS
Type BS50-4As 11" BS50-4As 11"
Material number machine 5100030599 5100068310
Material number engine 5100058517 5100058517
Number of strokes [1/min] 656 656
Impact force [kN] 16 16
Forward travel [m/min] 7,1 7,1
Length [mm] 673 673
Width [mm] 343 343
Height [mm] 940 940
Length (Ramming shoe) [mm] 340 340