Wacker Neuson C 48/13

Operator’s manual
Battery charger
C 48/13
03.2015
5100010183en / 03

Wacker Neuson C 48/13 Specifications

General

Brand	Wacker Neuson
Model	C 48/13
Category	Battery Charger
Language	English

Summary

Preface

Introduction

Application of the manual

Defines the scope and purpose of the operator's manual for the machine.

Storage location of the manual

Instructions on where to store the manual for accessibility throughout its service life.

Accident Prevention Regulations

Highlights the applicability of local and national accident prevention regulations.

Additional information

Notes regarding manual applicability to various machine types and potential modifications.

Target group

Explanation of symbols

Wacker Neuson Contact partner

Limitation of liability

Outlines conditions under which the manufacturer disclaims liability for damages.

Product identification of the machine

Safety

Policy

States the machine is built according to latest technical developments and safety rules.

Application in accordance with the intended purpose

Defines the intended use and consequences of improper application or misuse.

Structural changes

Responsibility of the operator

Defines the operator's legal responsibility for safe machine use and personnel protection.

User responsibilities

Lists user duties including safety regulations, risk assessment, and personnel training.

Personnel qualification

General sources of danger

Discusses residual dangers in machines that cannot be fully eliminated, requiring user awareness.

General safety instructions

Provides general safety guidelines related to working areas and general machine operation.

Specific safety instructions - Battery charger

External influences

Details safety requirements for battery charger use concerning environmental factors.

Operational safety

Outlines safety precautions for charging approved batteries and handling faults.

Electrical safety

Extension cable and cable drum

Safety guidelines for using extension cables and cable drums with the machine.

General safety instructions - Battery charger

Maintenance

Personal Protective Equipment

Specifies necessary personal protective equipment (PPE) for safe operation and maintenance.

Behavior in dangerous situations

Standard package

Setup and function

Application area

States the intended application of the battery charger for charging rechargeable batteries.

Brief description

Provides a concise overview of the battery charger's components and automatic charging process.

Components and operators controls

Transport

Loading and transporting the machine

Instructions on how to safely load and transport the battery charger, including cable storage.

Storage

Operation

Before commissioning

Details essential pre-operation checks and procedures for the machine.

Commission

Step-by-step guide for setting up and commissioning the battery charger and battery.

Operation

Explains how to monitor the charging status and check battery charge regularly.

Decommissioning

Procedures for safely unplugging the battery and de-energizing the charger after use.

Maintenance

Maintenance table

Lists daily maintenance tasks such as cleaning and visual inspections for the machine.

Maintenance jobs

Outlines specific maintenance procedures, including warnings for cleaning agents.

Troubleshooting

Fault table

Identifies common faults, their possible causes, and recommended remedial measures.

Fault table - rechargeable battery

Disposal

Disposal of old electrical and electronic equipment

Provides guidance on environmentally friendly disposal of electrical equipment in EU and other countries.

Technical data

Extension cable

Specific technical data and requirements for using extension cables with the machine.

Glossary

Class rating

Explains electrical machine safety class ratings according to DIN EN 61140.

Protection rating IP

EC Declaration of Conformity