3Safety
12
100_0201_si_0003.fm
3.3 Structural changes
Structural changes may not be made without written approval from the manufac-
turer. Unapproved structural changes may result in this machine posing dangers
for the operator and/or a third party as well as cause machine damage.
In the event of unapproved structural changes, the manufacturer's liability and
guarantee are also not applicable.
The following in particular are considered structural changes:
Opening the machine and a permanent removal of elements.
Installation of spare parts that do not originate from Wacker Neuson or are
not comparable in the design system and quality of the original parts.
3.4 Responsibility of the operator
The operator is the person who operates this machine for commercial or eco-
nomical purposes or who releases it to a third party for use / application and dur-
ing operation bears the legal product responsibility for the protection of the per-
sonnel or third party.
The operator must make the manual available to personnel at all times and make
sure that the user has read and understood this manual.
3.5 User responsibilities
Know and implement the applicable industrial safety regulations.
Use a risk assessment to identify the dangers that result from the working
conditions at the site of application.
Create operating instructions for the operation of this machine.
Regularly check whether the operating instructions correspond to the current
status of rules and standards.
Clearly regulate and specify the responsibilities for installation, operation,
troubleshooting, maintenance and cleaning.
Train personnel at regular intervals and inform them of possible dangers.
Provide the personnel with the necessary protective equipment.
To Next Page
Loading...