9 Operation
100_0201_op_0003.fm 25
9.2 Commission
Note: Only use rechargeable batteries from Wacker Neuson.
1. Place the battery charger on a dry and clean working area.
2. Place the rechargeable battery in the battery charger. Ensure the proper con-
nections!
3. Connect the battery charger to the power source.
4. Wait until the operation indicator of the battery charger illuminates (blue
LED).
5. Then connect the power cable to the rechargeable battery.
Item Designation Item Designation
1 Rechargeable battery (optional) 2 Power cable / plug
Item Designation Item Designation
1 Rechargeable battery:
Charge indicator LEDs
2 Battery charger:
Operating indicator
To Next Page
Loading...