8 Use and operation
100_0202_op_0009.fm 41
8.3.3 Starting the machine (electric starter)
1. Set the throttle control lever to full throttle position.
Note: In extreme cold also operate the decompression lever - set upwards. In
this position, the decompression system engages and the engine is ready
to start.
2. Insert the ignition key and turn to the right, the charging indicator light will
shine, the acoustic signal will sound.
3. Turn ignition switch key to position ll. As soon as the engine starts, release
the ignition switch key.
Note: Once the engine starts, the vibration begins.
4. Set the throttle control lever to idle.
5. Let the machine warm up for several minutes idle.
Pos. Designation Pos. Designation
1 Throttle control lever 3 Ignition lock
2 Decompression lever 4 Charging indicator light
To Next Page
Loading...
Need help?
General
