Wacker Neuson DPU 6555

3 Security
20
100_0202_si_0006.fm
3.11 Maintenance
The following instructions must be adhered to:
 This machine may not be maintained, repaired, adjusted or cleaned while
switched on.
 Observe maintenance intervals.
 After every maintenance or repair the safety devices on this machine must be
replaced.
 Observe the maintenance schedule. Work not listed must be taken on by the
service of the Wacker Neuson contact partner.
 Always immediately replace worn or damaged machine parts. Only use spare
parts from Wacker Neuson.
 Keep the machine clean.
 Missing, damaged or illegible safety stickers must be replaced immediately.
Safety stickers contain important information for the protection of the user.
 Maintenance work must be carried out in a clean and dry environment (e.g.
a workshop).