8 Use and operation
100_0202_op_0009.fm 35
8 Use and operation
8.1 Before starting
8.1.1 Checks before starting
Check engine and components for damage. If there is visible damage do not
operate the machine and contact a Wacker Neuson dealer immediately.
Ensure that loose packing material has been removed from the machine.
Check the fuel supply.
Check engine oil level.
Check hydraulic oil level.
Check fuel lines for tightness.
Make sure the screwed connections are firmly in place.
Note: Perform tests in accordance with the chapter Maintenance, top up fuel, lu-
bricants or coolants if necessary, see chapter Technical data.
WARNING
Improper handling may result in injury or serious material damage.
Read and follow all safety instructions in this operator's manual.
To Next Page
Loading...
