What to do if my Wacker Neuson Power Tool is losing hydraulic oil?
If you notice a loss of hydraulic oil in your Wacker Neuson Power Tool, it's likely due to leaks. In this case, have the machine repaired.
What to do if my Wacker Neuson Power Tool is not moving forward?
If your Wacker Neuson Power Tool isn't moving forward, it indicates a mechanical fault. Have the machine repaired.
What to do if reverse travel speed is too low on my Wacker Neuson Power Tool?
If the reverse travel speed on your Wacker Neuson Power Tool is too low, it's likely due to insufficient hydraulic oil in the centre pole head. Fill it with hydraulic oil.
What to do if compaction display LEDs are flashing on Wacker Neuson Power Tool?
If all the LEDs on the compaction display of your Wacker Neuson Power Tool are permanently flashing after initialisation, the sensor has not been successfully tested. This could be due to the switch-on procedure occurring when the engine is running, which requires professional repair.
General| Centrifugal Force | 65 kN |
|---|---|
| Base Plate Length | 900 mm |
| Engine Type | Diesel |
| Engine Manufacturer | Hatz |
| Engine Model | 1D81Z |
| Frequency | 69 Hz |
| Travel Speed | 28 m/min |
| Engine Power | 9.7 kW |
Defines the legal and operational responsibilities of the machine operator.
Lists the duties of the operator regarding safety, training, and compliance.
Safety measures to ensure safe operation of the machine.
Safety instructions for operating and refueling the machine's combustion engine.
General safety instructions to be followed during maintenance.
Details on required personal protective equipment for safe operation.
Provides guidance on preventive measures and actions during emergencies.
Identifies and describes the machine's operating controls and displays.
Details on dangers of falling machines and safe lifting procedures.
Instructions for attaching lifting tackle and tying down the machine for transport.
Essential checks to perform on the engine and components before starting.
Step-by-step guide for starting the machine using the manual crank.
Detailed steps and notes for using the starting crank effectively.
Instructions for starting the machine using the electric starter.
Warnings related to improper handling, exhaust fumes, and hot surfaces during maintenance.
A table detailing maintenance tasks, frequencies, and intervals.
Safety warnings and steps for changing the starter battery.
Steps for correctly installing and connecting a new starter battery.
Lists common faults, their possible causes, and remedial measures.
Procedure for jump-starting the machine using another vehicle's battery.
Detailed steps for connecting and disconnecting jumper cables for jump starting.
Detailed specifications for DPU 4545H, 4545He, and 4545Heh models.
Vibration and sound power level data for DPU 4545 models.
Specifications for DPU 4545Hec and 4545Hech US models.
Vibration and sound data for DPU 4545 US models.
Detailed specifications for DPU 5545H, 5545He, 5545Heh, 5545Heap models.
Vibration and sound power level data for DPU 5545 models.
Specifications for DPU 5545Hec and 5545Hech US models.
Vibration and sound data for DPU 5545 US models.
Technical details for Hatz engine models used in the vibratory plates.
To Next Page