EasyManua.ls Logo

Wacker Neuson DPU - Decommissioning

Wacker Neuson DPU
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9 Operation and use
30 100_0202_op_0009.fm
9.4.2 Reading Compatec – compaction display
This display roughly indicates the progress of the compaction.
The number of LEDs lit is proportional to the soil density, more illuminated LEDs corresponds to a
higher soil density.
9.5 Decommissioning
9.5.1 Decommissioning the machine
1. Put throttle control on hold until the detent.
2. Engine comes to a standstill.
NOTE
To protect the machine, the display unit warns the operator of over-compaction by quickly
flashing all LEDs. The brightness of the LED automatically adjusts to the light conditions
of the working area.
NOTE
It is possible to detect defective spots (non-compactable material) if the defective spot is
longer than one meter.
In the case of abrupt change from high to low-compacted soil (or vice versa), there is a
slow increase or decrease of the LEDs.
NOTE
Do not decommission the machine with the decompression lever, since this inevitably
leads to damage to the machine or engine.
Item Designation
1 Throttle control
1

Table of Contents

Related product manuals