9 Operation and use
100_0202_op_0009.fm 31
9.5.2 Decommissioning the machine (electric start)
Machines equipped with an 1D90e/L70/1B50e engine, have a rotary switch.
1. Put throttle control on hold until the detent.
2. Turn the ignition switch key inside the ignition lock towards left and pull it out; charge control lamp
goes out, acoustic signal becomes silent.
Item Designation Item Designation
1 Control lever 2 Rotary switch
Item Designation Item Designation
1 Throttle control 3 Charge control lamp
2 Ignition lock
NOTE
Compatec - compaction display automatically switches itself off once the ignition switch
key is removed. The display unit does not have a "sleep-function". Continuous operation
without the engine operating leads to battery discharge.
To Next Page
Loading...
