8 Operation and use
38 100_0202_op_0011.fm
1. Open rear protective hood.
2. Press the ON/OFF switch on the machine in order to deactivate it. If the operation and receiving unit
control lamps turn off, the machine is deactivated.
3. Charge rechargeable battery of the remote control with the charger cable.
4. Close rear protective hood.
Decommissioning the machine in an emergency situation (emergency stop)
1. Pressing the emergency stop switch – The machine will immediately stop moving and vibrating and
will automatically deactivate itself.
To unlock, turn the emergency stop switch to the left. The machine can then be re-activated.
Item Designation Item Designation
1 Control lamps 3 ON/OFF switch (red)
2 Display
NOTICE
If the machine is not deactivated, it will automatically deactivate after about 15 minutes
(center pole machine) or after about 1 hour (remote controlled machine).
The deactivation time can be set in the configuration menu.
NOTICE
The emergency stop switch is a safety device and should only be used for the immediate
switch off of the machine in the case of an emergency situation.
Item Designation
1 Emergency stop switch
To Next Page
Loading...
Need help?
General
