10 Maintenance
33
Working in the workshop
Perform maintenance work in a workshop on a workbench. This has the following
benefits:
Protection of the machine of contamination on the construction site.
A level and clean work surface makes work easier.
There is a better overview over small parts and they are not lost as easily.
10.3.1 Visual inspection for damage
f Check all machine parts and components for damage.
10.3.2 Cleaning machine
Clean the machine after use.
1. Clean the ventilation slots with a suitable non-metallic tool.
2. Wipe the housing with a damp and clean cloth.
WARNING
A damaged machine part or power cable can result in personal injury caused by
electric current.
f Do not operate a damaged machine.
f Have a damaged machine repaired immediately.
To Next Page
Loading...
