13 Accessories
38
Placing hammer on the truck
1. Switch off the machine.
2. Remove tool from the tool holder.
3. Clean the truck's guide rod.
4. Insert hammer with the tool holder on the guide rod and rest on the handles
of the truck.
Note: Do not crush the power cable at the handles.
5. Insert tool in the tool holder.
CAUTION
Insufficient stability of the truck.
Injury or damage caused by the truck tipping over or rolling off when the
hammer is placed on it.
f Place truck on a level surface.
f Secure truck against rolling off and tipping over.
To Next Page
Loading...
Need help?
General
